Flexible tipper van hire for your fleet
Our flexible tipper van hire options let you scale your fleet up or down to meet changing demands. Whether you need a tipper van for a single day's emergency haul or a multi-year project, we have a solution.
Terms are available from anywhere between one day to seven years, and you can cancel at any time.
Make a fleet hire enquiry
Make a vehicle hire enquiry
Vehicle Filter
Vehicle Category
Vehicle Type
Capability
Tonnage
Fuel Type
Sector
Reset filter
5 Seat Accessible HDU RAMP
5 Seat Accessible HDU RAMP
Specification
Dimensions
Key Features
Key Features
7 Seat Accessible Minibus
7 Seat Accessible Minibus
Specification
Dimensions
Key Features
Key Features
9 Seat Accessible Minibus
9 Seat Accessible Minibus
Specification
Dimensions
Key Features
Key Features
9 Seat Accessible Minibus PTS
9 Seat Accessible Minibus PTS
Specification
Dimensions
Key Features
Key Features
13 Seat Accessible Minibus
13 Seat Accessible Minibus
Specification
Dimensions
Key Features
Key Features
16 Essential Accessible Minibus
16 Essential Accessible Minibus
Specification
Dimensions
Key Features
Key Features
16 Seat Accessible Minibus
16 Seat Accessible Minibus
Specification
Dimensions
Key Features
Key Features
17 Prem Front Entry Accessible Minibus
17 Prem Front Entry Accessible Minibus
Specification
Dimensions
Key Features
Key Features
17 Prem Side Entry Accessible Minibus
17 Prem Side Entry Accessible Minibus
Specification
Dimensions
Key Features
Key Features
17 Seat Coach Built Accessible Minibus
Specification
17 Seat Coach Built Accessible Minibus
Specification
- Passenger Lift
- Access underfloor
- Safe Working Load: 400kgs
Dimensions
- Length: 1510mm
- Width: 925mm
Key Features
- LEZ compliant and Type approved
- Panoramic windows for all round vision
- Complete flat M2 tested floor and seats
- High Visibility headrests and seat belts
- Climate control
- Fully European Type Approved
- Drivers screen including night blind
- Sky light and cant rail tracking
- Front entry with fold out step
- Tachograph, Speed limited to 62mph
- Capacity to carry up to 6 wheelchairs
- Single seats with all age seat belts
- External lift with 400kg load capacity
- Reverse camera / Side view camera available
- Passenger load lamp
- Wipe clean interior
- D1 Licence required
- Securing straps/clamps not included
Key Features
- LEZ compliant and Type approved
- Panoramic windows for all round vision
- Complete flat M2 tested floor and seats
- High Visibility headrests and seat belts
- Climate control
- Fully European Type Approved
- Drivers screen including night blind
- Sky light and cant rail tracking
- Front entry with fold out step
- Tachograph, Speed limited to 62mph
- Capacity to carry up to 6 wheelchairs
- Single seats with all age seat belts
- External lift with 400kg load capacity
- Reverse camera / Side view camera available
- Passenger load lamp
- Wipe clean interior
- D1 Licence required
- Securing straps/clamps not included
17 Stand Front Entry Accessible Minibus
Specification
17 Stand Front Entry Accessible Minibus
Specification
- Passenger Lift
- PLS Access Underfloor
- Safe Working Load: 400kgs
Dimensions
- Length: 1410mm
- Width: 825mm
Key Features
- Front Entry
- LEZ compliant and Type approved
- Standard aperture windows for all round vision
- tinted to match OEM glass - Complete flat floor
- High Visibility headrests and seat belts
- Independent heating and air conditioning
- Soft feel interior trim
- Drivers screen including night blind
- Sky light and cant rail tracking
- Tachograph, Speed limited to 62mph
- Capacity to carry up to 6 wheelchairs
- Single seats
- External lift with 400kg load capacity
- High level rear light and reverse camera
- Passenger load lamp
- M2 tested floor and seats
- D1 Licence required
- Securing straps/clamps not included
Key Features
- Front Entry
- LEZ compliant and Type approved
- Standard aperture windows for all round vision
- tinted to match OEM glass - Complete flat floor
- High Visibility headrests and seat belts
- Independent heating and air conditioning
- Soft feel interior trim
- Drivers screen including night blind
- Sky light and cant rail tracking
- Tachograph, Speed limited to 62mph
- Capacity to carry up to 6 wheelchairs
- Single seats
- External lift with 400kg load capacity
- High level rear light and reverse camera
- Passenger load lamp
- M2 tested floor and seats
- D1 Licence required
- Securing straps/clamps not included
17 Stand Side Entry Accessible Minibus
Specification
17 Stand Side Entry Accessible Minibus
Specification
- Passenger Lift
- PLS Access Underfloor
- Safe Working Load: 400kgs
Dimensions
- Length: 1410mm
- Width: 825mm
Key Features
- Side Entry
- LEZ compliant and Type approved
- Standard aperture windows for all round vision
- tinted to match OEM glass - Complete flat floor
- High Visibility headrests and seat belts
- Independent heating and air conditioning
- Soft feel interior trim
- Drivers screen including night blind
- Sky light and cant rail tracking
- Tachograph, Speed limited to 62mph
- Capacity to carry up to 6 wheelchairs
- Single seats
- External lift with 400kg load capacity
- High level rear light and reverse camera
- Passenger load lamp
- M2 tested floor and seats
- D1 Licence required
- Securing straps/clamps not included
- Fold out side step
Key Features
- Side Entry
- LEZ compliant and Type approved
- Standard aperture windows for all round vision
- tinted to match OEM glass - Complete flat floor
- High Visibility headrests and seat belts
- Independent heating and air conditioning
- Soft feel interior trim
- Drivers screen including night blind
- Sky light and cant rail tracking
- Tachograph, Speed limited to 62mph
- Capacity to carry up to 6 wheelchairs
- Single seats
- External lift with 400kg load capacity
- High level rear light and reverse camera
- Passenger load lamp
- M2 tested floor and seats
- D1 Licence required
- Securing straps/clamps not included
- Fold out side step
Wheelchair Accessible Vehicle
Specification
Wheelchair Accessible Vehicle
Specification
Dimensions
- Entry Height: 1334mm
- Internal Headheight: 1430mm
- Converted Floor Length: 1350mm
- Overall Length: 4880mm
- Overall Width (inc mirrors): 2060mm
- Overall Height: 2705mm
- Weight: 2345kgs
Key Features
- IVA Certified
- Easy drivability and rear parking sensors
- Excellent visibility and privacy glass
- Climate control
- Lowered level floor
- Quick, simple and easy loading
- Easy to operate lightweight ramp
- Accommodates virtually any manual or
electric wheelchair - Combined winch and forward restraints
- Full cross and diagonal safety belt for
wheelchair passenger - Automatic winch for assisted loading
- Standard Licence required
- 5 seats plus 1 wheelchair
Key Features
- IVA Certified
- Easy drivability and rear parking sensors
- Excellent visibility and privacy glass
- Climate control
- Lowered level floor
- Quick, simple and easy loading
- Easy to operate lightweight ramp
- Accommodates virtually any manual or
electric wheelchair - Combined winch and forward restraints
- Full cross and diagonal safety belt for
wheelchair passenger - Automatic winch for assisted loading
- Standard Licence required
- 5 seats plus 1 wheelchair
2+2 Electric Buggy
2+2 Electric Buggy
Specification
Dimensions
Key Features
Key Features
2+2 Petrol Buggy
2+2 Petrol Buggy
Specification
Dimensions
Key Features
Key Features
2 Seat Cube Box Electric Buggy
2 Seat Cube Box Electric Buggy
Specification
Dimensions
Key Features
Key Features
4 Seat Electric Buggy
4 Seat Electric Buggy
Specification
Dimensions
Key Features
Key Features
4 Seat Petrol Buggy
4 Seat Petrol Buggy
Specification
Dimensions
Key Features
Key Features
4x4 ATV/UTV 2 Seat Diesel Buggy
4x4 ATV/UTV 2 Seat Diesel Buggy
Specification
Dimensions
Key Features
Key Features
4x4 ATV/UTV 2 Seat Electric Buggy
4x4 ATV/UTV 2 Seat Electric Buggy
Specification
Dimensions
Key Features
Key Features
4x4 ATV/UTV 4 Seat Buggy
4x4 ATV/UTV 4 Seat Buggy
Specification
Dimensions
Key Features
Key Features
6 Seat Electric Buggy
6 Seat Electric Buggy
Specification
Dimensions
Key Features
Key Features
6 Seat Petrol Buggy
6 Seat Petrol Buggy
Specification
Dimensions
Key Features
Key Features
Buggy Accessories
Buggy Accessories
Specification
Dimensions
Key Features
Key Features
Longbed Electric Buggy
Longbed Electric Buggy
Specification
Dimensions
Key Features
Key Features
Longbed Petrol Buggy
Longbed Petrol Buggy
Specification
Dimensions
Key Features
Key Features
Utility Electric Buggy
Utility Electric Buggy
Specification
Dimensions
Key Features
Key Features
Utility Petrol Buggy
Utility Petrol Buggy
Specification
Dimensions
Key Features
Key Features
Electric UTV 4 seat Buggy
Electric UTV 4 seat Buggy
Specification
Dimensions
Key Features
Key Features
GB 8 Seat Standard Buggy
GB 8 Seat Standard Buggy
Specification
Dimensions
Key Features
Key Features
GB Ambulance Petrol Buggy
GB Ambulance Petrol Buggy
Specification
Dimensions
Key Features
Key Features
GB Specialist Buggy
GB Specialist Buggy
Specification
Dimensions
Key Features
Key Features
GB Buggy Trailer
GB Buggy Trailer
Specification
Dimensions
Key Features
Key Features
GB Buggy Trailer Caged Side
GB Buggy Trailer Caged Side
Specification
Dimensions
Key Features
Key Features
GB Wheelchair Electric Buggy
GB Wheelchair Electric Buggy
Specification
Dimensions
Key Features
Key Features
GB Wheelchair Petrol Buggy
GB Wheelchair Petrol Buggy
Specification
Dimensions
Key Features
Key Features
Large 4 seat UTV Buggy
Large 4 seat UTV Buggy
Specification
Dimensions
Key Features
Key Features
Quads
Quads
Specification
Dimensions
Key Features
Key Features
3.9T 6 Seat Van BEV
3.9T 6 Seat Van BEV
Specification
Dimensions
Key Features
Key Features
3.5T MEWP Accs 13.5M
3.5T MEWP Accs 13.5M
Specification
Dimensions
Key Features
Key Features
5T MEWP Access 14.5M
5T MEWP Access 14.5M
Specification
Dimensions
Key Features
Key Features
5T Barrier Van
5T Barrier Van
Specification
Dimensions
Key Features
Key Features
5T Curtainside Truck
5T Curtainside Truck
Specification
Dimensions
Key Features
Key Features
5T XLWB Panel Van
5T XLWB Panel Van
Specification
Dimensions
Key Features
Key Features
6.5T Box Truck
6.5T Box Truck
Specification
Dimensions
Key Features
Key Features
7.2T Box Truck Tail Lift
7.2T Box Truck Tail Lift
Specification
Dimensions
Key Features
Key Features
7.2T D/S TM Plas Tail Lift
7.2T D/S TM Plas Tail Lift
Specification
Dimensions
Key Features
Key Features
7.2T D/S TM Plastic B
7.2T D/S TM Plastic B
Specification
Dimensions
Key Features
Key Features
7.2T Tipper Truck
7.2T Tipper Truck
Specification
Dimensions
Key Features
Key Features
7.5T Beavertail
7.5T Beavertail
Specification
Dimensions
Key Features
Key Features
7.5T Box Truck
7.5T Box Truck
Specification
Dimensions
Key Features
Key Features
7.5T Box Column Lift
Specification
7.5T Box Column Lift
Specification
- Chassis Type: DAF FALF150 4x2 Day Cab
- Body Type: Box
- GVW: 7.5 tonnes
- Est Payload +/- 5%: 2350kg
Dimensions
- Body Internal Length: 6096mm
- Body Internal Width: 2400mm
- Body Internal Height: 2436mm
- Overall Length: 6250mm
- Overall Width: 2440mm
- Overall Height: 2442mm
- Wheelbase: 4300mm
Key Features
- Column lift
- White body panels
- Standard body floor
- Front bulkhead support
- Aluminium kick strips to front & sides 228mm
- 1 x cargo load track plus 2 x lashing rails
- Rear wide lath shutter door
- DEL1000kgs column tail lift
- Platform depth 915mm
- Hinged ramp
- Galvanized cross bearers spaced 400mm
- Dual mode safety gates to tail lift
- Yellow anti slip threshold on rear frame
- Optimum adjustable roof spoiler
- Heavy-duty rear springs
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
Key Features
- Column lift
- White body panels
- Standard body floor
- Front bulkhead support
- Aluminium kick strips to front & sides 228mm
- 1 x cargo load track plus 2 x lashing rails
- Rear wide lath shutter door
- DEL1000kgs column tail lift
- Platform depth 915mm
- Hinged ramp
- Galvanized cross bearers spaced 400mm
- Dual mode safety gates to tail lift
- Yellow anti slip threshold on rear frame
- Optimum adjustable roof spoiler
- Heavy-duty rear springs
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
7.5T Box Sleeper Tail Lift
7.5T Box Sleeper Tail Lift
Specification
Dimensions
Key Features
Key Features
7.5T Box Truck Tail Lift
7.5T Box Truck Tail Lift
Specification
Dimensions
Key Features
Key Features
7.5T Box Truck Tuck Away Tail Lift
Specification
7.5T Box Truck Tuck Away Tail Lift
Specification
- Chassis Type: DAF FALF150 4x2 Day Cab
- Body Type: Box
- GVW: 7.5 tonnes
- Est Payload +/- 5%: 2350kg
Dimensions
- Body Internal Length: 6096mm
- Body Internal Width: 2400mm
- Body Internal Height: 2436mm
- Overall Length: 6250mm
- Overall Width: 2440mm
- Overall Height: 2442mm
- Wheelbase: 4300mm
Key Features
- White body panels
- Standard body floor
- Front bulkhead support
- Aluminium kick strips to front & sides 228mm
- 1 x cargo load track plus 2 x lashing rails
- Rear wide lath shutter door
- Del 1000kgs tuck away lift
- Platform depth 1220mm
- Hinged ramp
- Galvanized cross bearers spaced 400mm
- Dual mode safety gates to tail lift
- Yellow anti-slip threshold on rear frame
- Optimum adjustable roof spoiler
- Heavy duty rear springs
- Body attachments
- 100A alternator + 2 x 175Ah batteries
Key Features
- White body panels
- Standard body floor
- Front bulkhead support
- Aluminium kick strips to front & sides 228mm
- 1 x cargo load track plus 2 x lashing rails
- Rear wide lath shutter door
- Del 1000kgs tuck away lift
- Platform depth 1220mm
- Hinged ramp
- Galvanized cross bearers spaced 400mm
- Dual mode safety gates to tail lift
- Yellow anti-slip threshold on rear frame
- Optimum adjustable roof spoiler
- Heavy duty rear springs
- Body attachments
- 100A alternator + 2 x 175Ah batteries
7.5T Curtainside Truck
Specification
7.5T Curtainside Truck
Specification
- Chassis Type: DAF FALF150 4x2 Day Cab
- Body Type: Curtain
- GVW: 7.5 tonnes
- Est Payload +/- 5%: 2420kg
Dimensions
- Body Internal Length: 6096mm
- Body Internal Width: 2400mm
- Body Internal Height: 2480mm
- Overall Length: 6250mm
- Overall Width: 2440mm
- Overall Height: 2480mm
- Wheelbase: 4300mm
Key Features
- Curtain colour blue 5028
- Standard body floor
- 1200mm plywood front plus 300mm galvanised steel kick strip
- Floor rings plus cargo pole
- 2 x cargo track 300mm from cant rail
- 16 x load straps with rave hook and H024 roller ends
- Rear double doors
- Anti-slip threshold on rear frame
- Sprung door restraints
- DEL 1000kgs tuck-under tail lift
- Platform depth 1220mm
- Fixed ramp with roll stops
- Galvanized cross bearers spaced 400mm
- 2 x rear D buffers
- 2 x yellow grab handles to rear
- Rear cassette step to LHS
- Optimum adjustable roof spoiler
- Heavy duty rear springs
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
Key Features
- Curtain colour blue 5028
- Standard body floor
- 1200mm plywood front plus 300mm galvanised steel kick strip
- Floor rings plus cargo pole
- 2 x cargo track 300mm from cant rail
- 16 x load straps with rave hook and H024 roller ends
- Rear double doors
- Anti-slip threshold on rear frame
- Sprung door restraints
- DEL 1000kgs tuck-under tail lift
- Platform depth 1220mm
- Fixed ramp with roll stops
- Galvanized cross bearers spaced 400mm
- 2 x rear D buffers
- 2 x yellow grab handles to rear
- Rear cassette step to LHS
- Optimum adjustable roof spoiler
- Heavy duty rear springs
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
7.5T Curtainside Truck Tail Lift
7.5T Curtainside Truck Tail Lift
Specification
Dimensions
Key Features
Key Features
7.5T D/S Bowser
7.5T D/S Bowser
Specification
Dimensions
Key Features
Key Features
7.5T Dropside Truck
7.5T Dropside Truck
Specification
Dimensions
Key Features
Key Features
7.5T Dropside Truck with Crane
Specification
7.5T Dropside Truck with Crane
Specification
- Chassis Type: DAF LF 45 chassis cab
- Body Type: Dropside
- GVW: 7.5 tonnes
- Est Payload +/- 5%: 1780kg
Dimensions
- Body Bed Length: 5486mm
- Body Bed Width: 2455mm
- Body Bed Height: 406mm
- Wheelbase: 4300mm
Key Features
- PK 7001 DS crane
- Aluminium double dropside body
- 100mm x 50mm x 3mm galvanised channel section
- 18mm WISA deck floor
- 75mm x 50mm x 6mm aluminium angle
- 1” Galvanised mesh, capped with 1” D moulding.
- 8” Aluminium corrugated headboard planks
- 1” x 1” aluminium removable corner poses with sockets
- 1.8mm double skinned (25.4mm overall thickness)
- Aluminium planked side board 406mm high.
- Thermoplastic wings
- Rope hooks fitted to all bearers
- Lifting moment 60.4 kNm [6.2mtr]
- Classification according to EN12999 : 2011
- Slewing range 400°
- 2 section hydraulic extension boom from 5.5m - 7.4m
- Telescopic outriggers with hydr. extension to both sides - width 4.9m
- AUSVW/AUSW stabiliser beam not stowed
- BEL illuminated control panels and warning lights on stabilisers
- Crane accessories comprising load hook, fixing attachments, & 50 litre hydraulic oil tank with return filter
- Paltronic 50 rated capacity indicator with overload protection and emergency cut-off
- Protection guard on outer boom cylinder
- Slipper Pad 300mm x 300mm x 40mm (Force 9 ton) x1
- Pump/PTO up to 70 litres with handbrake interlock
- Conspicuity markings cab & body to regulation ECE104
Key Features
- PK 7001 DS crane
- Aluminium double dropside body
- 100mm x 50mm x 3mm galvanised channel section
- 18mm WISA deck floor
- 75mm x 50mm x 6mm aluminium angle
- 1” Galvanised mesh, capped with 1” D moulding.
- 8” Aluminium corrugated headboard planks
- 1” x 1” aluminium removable corner poses with sockets
- 1.8mm double skinned (25.4mm overall thickness)
- Aluminium planked side board 406mm high.
- Thermoplastic wings
- Rope hooks fitted to all bearers
- Lifting moment 60.4 kNm [6.2mtr]
- Classification according to EN12999 : 2011
- Slewing range 400°
- 2 section hydraulic extension boom from 5.5m - 7.4m
- Telescopic outriggers with hydr. extension to both sides - width 4.9m
- AUSVW/AUSW stabiliser beam not stowed
- BEL illuminated control panels and warning lights on stabilisers
- Crane accessories comprising load hook, fixing attachments, & 50 litre hydraulic oil tank with return filter
- Paltronic 50 rated capacity indicator with overload protection and emergency cut-off
- Protection guard on outer boom cylinder
- Slipper Pad 300mm x 300mm x 40mm (Force 9 ton) x1
- Pump/PTO up to 70 litres with handbrake interlock
- Conspicuity markings cab & body to regulation ECE104
7.5T Flatbed Truck
7.5T Flatbed Truck
Specification
Dimensions
Key Features
Key Features
7.5T Hotbox
7.5T Hotbox
Specification
Dimensions
Key Features
Key Features
7.5T Tipper Truck
Specification
7.5T Tipper Truck
Specification
- Chassis Type: DAF LF 45 chassis cab
- Body Type: Tipper
- GVW: 7.5 tonnes
- Est Payload: +/- 5%: 2910kg
Dimensions
- Body Bed Length: 3657mm
- Body Bed Width: 2133mm
- Body Bed Height: 380mm
- Wheelbase: 3600mm
Key Features
- Steel front end tipping body
- Heavy duty steel ladder gantry manufactured from 100mm x 50mm x 3mm box section
- Steel pressed headboard 3mm thick
- 2” galvanised mesh infill sheet
- 15” pressed steel double drop-sides 1.6mm with 1.6mm infill sides
- Removable centre posts 100mm x 50mm x 3mm box section
- Tailgate, top hinged construction as per the sides with 2x tar chutes
- Floor, 3mm two piece steel, fully insulated
- Pressed steel wings incorporating body access step
- Galvanised steel chassis subframe
- Edbro 2LNC tipping gear
- Tipper body painted blue in 2 pack gloss
- Conspicuity markings cab & body to regulation ECE104
Key Features
- Steel front end tipping body
- Heavy duty steel ladder gantry manufactured from 100mm x 50mm x 3mm box section
- Steel pressed headboard 3mm thick
- 2” galvanised mesh infill sheet
- 15” pressed steel double drop-sides 1.6mm with 1.6mm infill sides
- Removable centre posts 100mm x 50mm x 3mm box section
- Tailgate, top hinged construction as per the sides with 2x tar chutes
- Floor, 3mm two piece steel, fully insulated
- Pressed steel wings incorporating body access step
- Galvanised steel chassis subframe
- Edbro 2LNC tipping gear
- Tipper body painted blue in 2 pack gloss
- Conspicuity markings cab & body to regulation ECE104
7.5T Tipper Grab
Specification
7.5T Tipper Grab
Specification
- Chassis Type: DAF LF 45 chassis cab
- Body Type: Tipper Grab
- GVW: 7.5 tonnes
- Est Payload: +/- 5%: 1320kg
Dimensions
- Body Bed Length: 3670mm
- Body Bed Width: 2435mm
- Body Bed Height: 380mm
- Wheelbase: 3600mm
Key Features
- 125 x 65mm steel channel section
- 80mm x 125mm steel channel section, of integral construction to give low loading height
- Two piece insulated pressed steel floor incorporating side raves
- Heavy-duty ladder gantry manufactured from 100 mm x 50mm x3mm steel box section
- Tailgate fitted with 2 tar chutes
- One man operated steel body prop
- In cab warning light and buzzer alert when the body is in the raised position. In accordance with C & U directives
- Binotto front-end tipping gear, complete with PTO operation
- Type approved aluminium side guards fitted to the nearside and offside of the body
- 16” amber rotating beacon fitted to the cab roof
- Lifting moment 60.4 kNm [6.2mtr]
- Classification according to EN12999 : 2011
- Slewing range 400°
- 2 section hydraulic extension boom from 5.5m - 7.4m
- Telescopic outriggers with hydr. extension to both sides - width 4.9m
- BEL illuminated control panels and warning lights on stabilisers
- Box level on each side of crane
- Slipper pad 300mm x 300mm x 40mm (Force 9 ton) x1
- Storage box with key lock (holds single EZ2189 square pad) for 300mm square pad x2
- 7.5T-10T PK4501 - PK6501HP - front mounting pump/PTO up to 70 litres with handbrake interlock
- Conspicuity markings cab and body to regulation ECE104
Key Features
- 125 x 65mm steel channel section
- 80mm x 125mm steel channel section, of integral construction to give low loading height
- Two piece insulated pressed steel floor incorporating side raves
- Heavy-duty ladder gantry manufactured from 100 mm x 50mm x3mm steel box section
- Tailgate fitted with 2 tar chutes
- One man operated steel body prop
- In cab warning light and buzzer alert when the body is in the raised position. In accordance with C & U directives
- Binotto front-end tipping gear, complete with PTO operation
- Type approved aluminium side guards fitted to the nearside and offside of the body
- 16” amber rotating beacon fitted to the cab roof
- Lifting moment 60.4 kNm [6.2mtr]
- Classification according to EN12999 : 2011
- Slewing range 400°
- 2 section hydraulic extension boom from 5.5m - 7.4m
- Telescopic outriggers with hydr. extension to both sides - width 4.9m
- BEL illuminated control panels and warning lights on stabilisers
- Box level on each side of crane
- Slipper pad 300mm x 300mm x 40mm (Force 9 ton) x1
- Storage box with key lock (holds single EZ2189 square pad) for 300mm square pad x2
- 7.5T-10T PK4501 - PK6501HP - front mounting pump/PTO up to 70 litres with handbrake interlock
- Conspicuity markings cab and body to regulation ECE104
7.5T Tipper Truck with Cage
7.5T Tipper Truck with Cage
Specification
Dimensions
Key Features
Key Features
7.5T Tipper Cage with Tail Lift
7.5T Tipper Cage with Tail Lift
Specification
Dimensions
Key Features
Key Features
7.5T Tipper with Crew Cab
7.5T Tipper with Crew Cab
Specification
Dimensions
Key Features
Key Features
7.5T Tipper Truck with Crane
7.5T Tipper Truck with Crane
Specification
Dimensions
Key Features
Key Features
7.5T Tipper Insulate
7.5T Tipper Insulate
Specification
Dimensions
Key Features
Key Features
7.5T Tipper Truck with Pen Crane
7.5T Tipper Truck with Pen Crane
Specification
Dimensions
Key Features
Key Features
12T Beavertail
12T Beavertail
Specification
Dimensions
Key Features
Key Features
12T Box Truck with Lift
12T Box Truck with Lift
Specification
Dimensions
Key Features
Key Features
12T Box Truck with TuckAway Tail Lift
12T Box Truck with TuckAway Tail Lift
Specification
Dimensions
Key Features
Key Features
12T Curtainside Truck with Lift
12T Curtainside Truck with Lift
Specification
Dimensions
Key Features
Key Features
12T Dropside Truck
12T Dropside Truck
Specification
Dimensions
Key Features
Key Features
12T Dropside Truck with Crane
12T Dropside Truck with Crane
Specification
Dimensions
Key Features
Key Features
12T PEU
12T PEU
Specification
Dimensions
Key Features
Key Features
12T Tipper Truck
12T Tipper Truck
Specification
Dimensions
Key Features
Key Features
12T Tipper Grab
12T Tipper Grab
Specification
Dimensions
Key Features
Key Features
14T Box Truck with Lift
14T Box Truck with Lift
Specification
Dimensions
Key Features
Key Features
15T Curtainside Truck
15T Curtainside Truck
Specification
Dimensions
Key Features
Key Features
15T Road Sweeper
15T Road Sweeper
Specification
Dimensions
Key Features
Key Features
15T Tipper Truck
15T Tipper Truck
Specification
Dimensions
Key Features
Key Features
18T Barrier Rig
18T Barrier Rig
Specification
Dimensions
Key Features
Key Features
18T Beavertail
18T Beavertail
Specification
Dimensions
Key Features
Key Features
18T Box Day Col
18T Box Day Col
Specification
Dimensions
Key Features
Key Features
18T Box Day Tuck
18T Box Day Tuck
Specification
Dimensions
Key Features
Key Features
18T Box Sleeper Truck with Column
18T Box Sleeper Truck with Column
Specification
Dimensions
Key Features
Key Features
18T Box Sleeper Truck with Tuck
Specification
18T Box Sleeper Truck with Tuck
Specification
- Chassis Type: DAF CF 250
- Body Type: Box
- GVW: 18 tonnes
- Est Payload +/- 5%: 9000kg
Dimensions
- Body Internal Length: 8825mm
- Body Internal Width: 2550mm
- Body Internal Height: 2435mm
- Overall Length: 8860mm
- Overall Width: 2540mm
- Overall Height: 2500mm
- Wheelbase: 6900mm
Key Features
- White body panels
- Standard body floor
- Front bulkhead support
- Aluminium kick strips to front and sides 300mm
- 2 x cargo load track bulkhead and sides 750mm and 1500mm from floor
- Load lock screwed and bonded
- Rear wide lath shutter door
- Yellow anti-slip threshold on rear frame
- DEL 1500kgs column tail lift
- Platform depth 1065mm
- Hinged ramp
- Galvanized cross bearers spaced 400mm
- Dual mode safety gates to tail lift
- Contour markings side white / rear red
- Optimum adjustable roof spoiler
- Application connector for tail lift control
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
Key Features
- White body panels
- Standard body floor
- Front bulkhead support
- Aluminium kick strips to front and sides 300mm
- 2 x cargo load track bulkhead and sides 750mm and 1500mm from floor
- Load lock screwed and bonded
- Rear wide lath shutter door
- Yellow anti-slip threshold on rear frame
- DEL 1500kgs column tail lift
- Platform depth 1065mm
- Hinged ramp
- Galvanized cross bearers spaced 400mm
- Dual mode safety gates to tail lift
- Contour markings side white / rear red
- Optimum adjustable roof spoiler
- Application connector for tail lift control
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
18T Box Truck Sleep Tail Lift TM
18T Box Truck Sleep Tail Lift TM
Specification
Dimensions
Key Features
Key Features
18T Builder Merchant
18T Builder Merchant
Specification
Dimensions
Key Features
Key Features
18T Curtainside Truck
18T Curtainside Truck
Specification
Dimensions
Key Features
Key Features
18T Curtainside Truck Day Tail Lift
18T Curtainside Truck Day Tail Lift
Specification
Dimensions
Key Features
Key Features
18T Curtainside Truck Sleep Tail Lift
Specification
18T Curtainside Truck Sleep Tail Lift
Specification
- Chassis Type: DAF CF 250
- Body Type: Curtain
- GVW: 18 tonnes
- Est Payload +/- 5%: 8650kg
Dimensions
- Body Internal Length: 8825mm
- Body Internal Width: 2550mm
- Body Internal Height: 2660mm
- Overall Length: 8865mm
- Overall Width: 2550mm
- Overall Height: 2690mm
- Wheelbase: 6900mm
Key Features
- Curtain colour 5028 Blue
- Standard body floor
- 1200mm plywood front galvanised plus 300mm galvanised steel kick strip
- Floor rings plus cargo pole
- 2 x cargo track 300mm from cant rail
- 16 x load straps with rave hook and H024 roller ends
- Rear double doors
- Anti-slip threshold on rear frame
- Sprung door restraints
- DEL1500kgs tuck-under tail lift
- Platform depth 1425mm
- Fixed ramp with roll stops
- Galvanized cross bearers spaced 400mm
- 2 x rear D buffers
- 2 x yellow grab handles to rear
- Rear cassette step to LHS
- Contour markings side white / rear red
- Optimum adjustable roof spoiler
- Application connector for tail lift control
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
Key Features
- Curtain colour 5028 Blue
- Standard body floor
- 1200mm plywood front galvanised plus 300mm galvanised steel kick strip
- Floor rings plus cargo pole
- 2 x cargo track 300mm from cant rail
- 16 x load straps with rave hook and H024 roller ends
- Rear double doors
- Anti-slip threshold on rear frame
- Sprung door restraints
- DEL1500kgs tuck-under tail lift
- Platform depth 1425mm
- Fixed ramp with roll stops
- Galvanized cross bearers spaced 400mm
- 2 x rear D buffers
- 2 x yellow grab handles to rear
- Rear cassette step to LHS
- Contour markings side white / rear red
- Optimum adjustable roof spoiler
- Application connector for tail lift control
- Body attachments
- 100A alternator + 2 x 175Ah batteries
- Enterprise tail lift flags
18T Dropside Truck Crane Front
Specification
18T Dropside Truck Crane Front
Specification
- Chassis Type: DAF CF65.290 4x2 Sleeper cab
- Body Type: Dropside
- GVW: 18 tonnes
- Est Payload +/- 5%: 9250kg
Dimensions
- Body Bed Length: 7925mm
- Body Bed Width: 2286mm
- Body Bed Height: 406mm
- Wheelbase: 6900mm
Key Features
- Lifting moment 101.4Nm (10.3mt)
- Classification according to EN12999 : 2011
- Slewing range 400°
- Hydraulic outreach 5.8m
- Outriggers, with manual extension, including two hydraulic jacks - width 4.8m (R2) with tiltable footplate
- Painting to traffic light red RAL 3020
- HPSC-L stability monitoring system (Light)
- AUSVW/AUSW stabiliser beam not stowed
- BEL illuminated control panels and warning lights on stabilisers
- Pilot operated check valves on stabiliser cylinders
- Controls on each side of the crane
- Box level on each side of crane with double acting hydraulic cylinders
- Load hold valve on inner/outer boom cylinder, slewing, & on extension boom cylinder with return oil utilisation
- Crane accessories comprising load hook, fixing attachments, & 65 litre hydraulic oil tank with return filter
- High pressure filter
- Paltronic 50 rated capacity indicator with overload protection and emergency cut off
- Hour counter
- Boom above horizontal
- Secondary leg catches
- Equipment for two additional hydraulic functions for PK11.001 SLD 3 standard
- Protection guard on outer boom cylinder
- Conspicuity markings cab & body to regulation ECE104
Key Features
- Lifting moment 101.4Nm (10.3mt)
- Classification according to EN12999 : 2011
- Slewing range 400°
- Hydraulic outreach 5.8m
- Outriggers, with manual extension, including two hydraulic jacks - width 4.8m (R2) with tiltable footplate
- Painting to traffic light red RAL 3020
- HPSC-L stability monitoring system (Light)
- AUSVW/AUSW stabiliser beam not stowed
- BEL illuminated control panels and warning lights on stabilisers
- Pilot operated check valves on stabiliser cylinders
- Controls on each side of the crane
- Box level on each side of crane with double acting hydraulic cylinders
- Load hold valve on inner/outer boom cylinder, slewing, & on extension boom cylinder with return oil utilisation
- Crane accessories comprising load hook, fixing attachments, & 65 litre hydraulic oil tank with return filter
- High pressure filter
- Paltronic 50 rated capacity indicator with overload protection and emergency cut off
- Hour counter
- Boom above horizontal
- Secondary leg catches
- Equipment for two additional hydraulic functions for PK11.001 SLD 3 standard
- Protection guard on outer boom cylinder
- Conspicuity markings cab & body to regulation ECE104
18T Dropside Truck
Specification
18T Dropside Truck
Specification
- Chassis Type: DAF CF65 290 4x2 Sleeper cab
- Body Type: Dropside
- GVW: 18 tonnes
- Est Payload +/- 5%: 12290kg
Dimensions
- Body Bed Length: 8534mm
- Body Bed Width: 2286mm
- Body Bed Height: 406mm
- Wheelbase: 6900mm
Key Features
- Galvanised Steel 3mm bearers and 5mm runners
- Bearers at 406mm centre bolted to all runners
- Subframe half bearer fitted over rear wheels to maintain 406mm bearer pitch.
- Angled cleats fitted on every bearer with floor joints
- Rope hooks bolted to every bearer
- Galvanised steel side raves 142mm x 50mm x 5mm
- Cab height galvanised steel headboard frame (75mm x 50mm angle) with 75mm x 50mm full length supports
- 2 pairs galvanised steel rope hooks bolted to front of headboard
- Hinged anodised aluminium side guards
- All lighting to be either Trucklite or Rubbolite LED “plug & play” system with a minimum of 2 LEDs per light
- Rear top & side LED outline marker light to be protected by loop wiring
- LED number plate light fitted to rear
- Rear of lights protected with aluminium plate
- Aluminium rear closure over chassis ends
- ECE 104 high conspicuity tape to the side & cab in white & the rear in red
- Water test body
- NSSTA certification
- Conspicuity markings cab & body to regulation ECE104
Key Features
- Galvanised Steel 3mm bearers and 5mm runners
- Bearers at 406mm centre bolted to all runners
- Subframe half bearer fitted over rear wheels to maintain 406mm bearer pitch.
- Angled cleats fitted on every bearer with floor joints
- Rope hooks bolted to every bearer
- Galvanised steel side raves 142mm x 50mm x 5mm
- Cab height galvanised steel headboard frame (75mm x 50mm angle) with 75mm x 50mm full length supports
- 2 pairs galvanised steel rope hooks bolted to front of headboard
- Hinged anodised aluminium side guards
- All lighting to be either Trucklite or Rubbolite LED “plug & play” system with a minimum of 2 LEDs per light
- Rear top & side LED outline marker light to be protected by loop wiring
- LED number plate light fitted to rear
- Rear of lights protected with aluminium plate
- Aluminium rear closure over chassis ends
- ECE 104 high conspicuity tape to the side & cab in white & the rear in red
- Water test body
- NSSTA certification
- Conspicuity markings cab & body to regulation ECE104
18T Gritter
18T Gritter
Specification
Dimensions
Key Features
Key Features
18T Gully Emptier MVC
18T Gully Emptier MVC
Specification
Dimensions
Key Features
Key Features
18T Gully Vacuum HVC
18T Gully Vacuum HVC
Specification
Dimensions
Key Features
Key Features
18T Hotbox
18T Hotbox
Specification
Dimensions
Key Features
Key Features
18T TM Block Crash Cushion
18T TM Block Crash Cushion
Specification
Dimensions
Key Features
Key Features
18T TM Crash Cushion
18T TM Crash Cushion
Specification
Dimensions
Key Features
Key Features
18T TM Crash Cushion RedX
18T TM Crash Cushion RedX
Specification
Dimensions
Key Features
Key Features
18T Tipper Truck
Specification
18T Tipper Truck
Specification
- Chassis Type: DAF Tipper
- Body Type: Tipper
- GVW: 18 tonnes
- Est Payload: +/- 5%: 10980kg
Dimensions
- Body Bed Length: 4800mm
- Body Bed Width: 2370mm
- Body Bed Height: 700mm
- Wheelbase: 4150mm
Key Features
- All steel fully insulated ‘Workmate 1800’ tipping body
- 4mm pressed Domex/Strenx 700 high tensile steel floor
- 3mm Domex 700 pressed x-member construction
- Under floor insulation skins galvanised - concealed panels primed
- 700mm high pressed double drop, double skinned 2.5mm inner 2.0mm outer steel sides
- Fixed front and rear posts pressed
- 4 x spring assist units to side panels
- Removable centre posts
- Top swung tail to incorporate 3 x tar chutes with lever operation
- Ramp fasteners either side of tail
- 3mm Domex 700 steel headboard
- 2“ galvanised mesh infill and ladder gantry
- Rockwool insulation throughout
- N/S ladder access point
- Pressed steel wings bolt-on – N3G category
- Rubber side protectors on wings
- Edbro CX11 front end hydraulic tipping ram
- Supply and fit gear pump
- In cab controls
- Integral body prop
- 1200mm cab-mounted dual amber beacon
- Whole vehicle type approved lateral and rear protection
- Rear protection to include type approved tow bar and 4 bolt hitch, factory fit 7 pin electrics
- Side and rear marker lights to current regulations
- Cab factory finish
- Conspicuity markings cab & body to regulation ECE104
Key Features
- All steel fully insulated ‘Workmate 1800’ tipping body
- 4mm pressed Domex/Strenx 700 high tensile steel floor
- 3mm Domex 700 pressed x-member construction
- Under floor insulation skins galvanised - concealed panels primed
- 700mm high pressed double drop, double skinned 2.5mm inner 2.0mm outer steel sides
- Fixed front and rear posts pressed
- 4 x spring assist units to side panels
- Removable centre posts
- Top swung tail to incorporate 3 x tar chutes with lever operation
- Ramp fasteners either side of tail
- 3mm Domex 700 steel headboard
- 2“ galvanised mesh infill and ladder gantry
- Rockwool insulation throughout
- N/S ladder access point
- Pressed steel wings bolt-on – N3G category
- Rubber side protectors on wings
- Edbro CX11 front end hydraulic tipping ram
- Supply and fit gear pump
- In cab controls
- Integral body prop
- 1200mm cab-mounted dual amber beacon
- Whole vehicle type approved lateral and rear protection
- Rear protection to include type approved tow bar and 4 bolt hitch, factory fit 7 pin electrics
- Side and rear marker lights to current regulations
- Cab factory finish
- Conspicuity markings cab & body to regulation ECE104
18T Tipper Crash Cushion
18T Tipper Crash Cushion
Specification
Dimensions
Key Features
Key Features
18T Tipper Grab
18T Tipper Grab
Specification
Dimensions
Key Features
Key Features
18T Tipper Insulated
18T Tipper Insulated
Specification
Dimensions
Key Features
Key Features
18T Toploader
18T Toploader
Specification
Dimensions
Key Features
Key Features
26T Curtainside Truck MofetKit
26T Curtainside Truck MofetKit
Specification
Dimensions
Key Features
Key Features
26T Curtainside Truck
26T Curtainside Truck
Specification
Dimensions
Key Features
Key Features
26T Barrier Rig
26T Barrier Rig
Specification
Dimensions
Key Features
Key Features
26T Box Truck Sleep Tail Lift
Specification
26T Box Truck Sleep Tail Lift
Specification
- Chassis Type: DAF CF65.290 FAR 6x2 Sleeper cab
- Body Type: Box
- GVW: 26 tonnes
- Est Payload +/- 5%: 12000kg
Dimensions
- Body Internal Length: 8706mm
- Body Internal Width: 2490mm
- Body Internal Height: 2500mm
- Overall Length: 8858mm
- Overall Width: 2550mm
- Overall Height: 2438mm
- Wheelbase: 5600mm
Key Features
- Galvanised steel 3mm bearers and 5mm x 142mm runners
- Subframe fitted over rear wheels to maintain 304mm bearer pitch
- Angled cleats fitted on every bearer
- Anti-slip Buffalo 27mm birch plywood with phenolic faced overlay
- Rear board fitted with two strips of yellow anti-slip tape
- DEL rear floor plate bearer, yellow anti-slip tape fitted to the full width
- Cappings, corner pillars raves and cant rails
- Bulkhead to be constructed from 17mm GRP white impregnated panel gloss finish
- 2 off externally mounted 50mm x 75mm x 1270mm galvanised angle bulkhead
- Internal kick strips to sidewalls and front bulkhead galvanised steel 300mm
- Heavy duty pressed galvanised steel with gusseted corners
- DEL rear floor plate with yellow anti-slip tape fitted to the top
- 200mm rear buffers fitted vertically at the base of the pillars to suit the tailift
- One piece translucent fibreglass panel bonded to galvanised steel roof sticks (600mm) over aluminium framework
- Anodised aluminium side guards (hinged both sides via release pins) to current EWVTA/C&U regulations
- Two levels of galvanised 1806 load lock track at 750 & 1500mm centres from the floor
- ECE104 high conspicuity tape to the sides and cab in white and the rear in red
- DEL DA1500kg tuckaway tail lift
Key Features
- Galvanised steel 3mm bearers and 5mm x 142mm runners
- Subframe fitted over rear wheels to maintain 304mm bearer pitch
- Angled cleats fitted on every bearer
- Anti-slip Buffalo 27mm birch plywood with phenolic faced overlay
- Rear board fitted with two strips of yellow anti-slip tape
- DEL rear floor plate bearer, yellow anti-slip tape fitted to the full width
- Cappings, corner pillars raves and cant rails
- Bulkhead to be constructed from 17mm GRP white impregnated panel gloss finish
- 2 off externally mounted 50mm x 75mm x 1270mm galvanised angle bulkhead
- Internal kick strips to sidewalls and front bulkhead galvanised steel 300mm
- Heavy duty pressed galvanised steel with gusseted corners
- DEL rear floor plate with yellow anti-slip tape fitted to the top
- 200mm rear buffers fitted vertically at the base of the pillars to suit the tailift
- One piece translucent fibreglass panel bonded to galvanised steel roof sticks (600mm) over aluminium framework
- Anodised aluminium side guards (hinged both sides via release pins) to current EWVTA/C&U regulations
- Two levels of galvanised 1806 load lock track at 750 & 1500mm centres from the floor
- ECE104 high conspicuity tape to the sides and cab in white and the rear in red
- DEL DA1500kg tuckaway tail lift
26T Curtainside Truck Sleep Tail Lift
Specification
26T Curtainside Truck Sleep Tail Lift
Specification
- Chassis Type: DAF CF65.290 FAR 6x2 Sleeper cab
- Body Type: Curtain
- GVW: 26 tonnes
- Est Payload +/- 5%: 15500kg
Dimensions
- Body Internal Length: 8674mm
- Body Internal Width: 2490mm
- Body Internal Height: 2690mm
- Overall Length: 8840mm
- Overall Width: 2550mm
- Overall Height: 2690mm
- Wheelbase: 5600mm
Key Features
- Galvanised Steel 3mm bearers and 5mm x 142mm runners
- Subframe /half bearer fitted over rear wheels
- Angled cleats fitted to bearers with floor joints
- 27mm Buffalo phenolic coated plywood screwed to every bearer
- Rear board fitted with two strips of yellow anti-slip tape
- Flush bulkhead incorporating 4 pillars
- Front full width alloy cant rail complete with pelmet protectors to both sides
- Langver front tensioners to both sides
- High tensile galvanised steel side raves 142mm x 25mm x 3mm bolted through sides
- 16 off pull up lashing rings 8 per side evenly spaced along the side aperture
- Aluminium cant rail with integral curtain
- One piece translucent fibreglass roof panel with galvanised roof sticks at 600mm centres
- Side aperture closed by 2x2 weave 850gm2 PVC curtains with vertical tension straps & stainless steel positive locking buckles
- Two off 290 cargo tracks positioned 300mm in from cant rail fixed to roof structure
- 16 off 750kg load straps with closed rave hooks.
- Sideguards rear & under run bumper
- Hinged anodised aluminium side guards
- Rear under run bumper as part of the tailift
- 1500kg Tuckaway tailift, platform with trolley
- Cab mounted illuminated isolator switch
- Curtain colour Sioen 5028 Ultra Blue
- Weigh vehicle & fit un-laden weight decal to front n/s of bulkhead
- NSSTA certification
Key Features
- Galvanised Steel 3mm bearers and 5mm x 142mm runners
- Subframe /half bearer fitted over rear wheels
- Angled cleats fitted to bearers with floor joints
- 27mm Buffalo phenolic coated plywood screwed to every bearer
- Rear board fitted with two strips of yellow anti-slip tape
- Flush bulkhead incorporating 4 pillars
- Front full width alloy cant rail complete with pelmet protectors to both sides
- Langver front tensioners to both sides
- High tensile galvanised steel side raves 142mm x 25mm x 3mm bolted through sides
- 16 off pull up lashing rings 8 per side evenly spaced along the side aperture
- Aluminium cant rail with integral curtain
- One piece translucent fibreglass roof panel with galvanised roof sticks at 600mm centres
- Side aperture closed by 2x2 weave 850gm2 PVC curtains with vertical tension straps & stainless steel positive locking buckles
- Two off 290 cargo tracks positioned 300mm in from cant rail fixed to roof structure
- 16 off 750kg load straps with closed rave hooks.
- Sideguards rear & under run bumper
- Hinged anodised aluminium side guards
- Rear under run bumper as part of the tailift
- 1500kg Tuckaway tailift, platform with trolley
- Cab mounted illuminated isolator switch
- Curtain colour Sioen 5028 Ultra Blue
- Weigh vehicle & fit un-laden weight decal to front n/s of bulkhead
- NSSTA certification
26T Dropside Truck Crane Rear
26T Dropside Truck Crane Rear
Specification
Dimensions
Key Features
Key Features
26T Flatbed Truck Grab
26T Flatbed Truck Grab
Specification
Dimensions
Key Features
Key Features
26T Gritter
26T Gritter
Specification
Dimensions
Key Features
Key Features
26T Refuse Truck
26T Refuse Truck
Specification
Dimensions
Key Features
Key Features
26T Tipper Grab
Specification
26T Tipper Grab
Specification
- Chassis Type: 26t 8 x 4 DAF N3GTipper
- Body Type: Tipper Grab
- GVW: 26 tonnes
- Est Payload +/- 5%: 10620kg
Dimensions
- Body Bed Length: 5800mm
- Body Bed Width: 2180mm
- Body Bed Height: 950mm
- Wheelbase: 5000mm
Key Features
- Epsilon M125 LC
- Factory fit PTO & rear 7 pin electrics-low level exhaust required
- High Tensile Steel Titan Series construction tipping body
- 5800mm x 2180mm x 950mm (approx)
- 5mm Hardox 450 wear plate one piece floor
- 5mm Hardox 450 internal kick plates
- 1 piece double skinned 3mm Domex 700 profiled fixed sides
- 3mm Domex profiled top rail, sides, front and tail
- 3mm Domex head board and front spill board
- Heavy duty rear & front posts 4mm Hardox to internal face
- 4mm Hardox top swung tail door with double pivot points
- RSC steel longitudinal body runners
- Domex 700 detachable pressed rear axle wings
- O/S N/S body access over rear axle
- Under floor twin stabilised tipping gear
- Edbro TS26 or Harsh J100
- Audible and visual height warning
- Whole vehicle type approved lateral and rear protection
- Rear protection to include type approved tow bar & 4 bolt hitch, factory fit 7 pin electrics
- Side & rear marker lights to current regulations
- Conspicuity markings cab & body to regulation ECE104
Key Features
- Epsilon M125 LC
- Factory fit PTO & rear 7 pin electrics-low level exhaust required
- High Tensile Steel Titan Series construction tipping body
- 5800mm x 2180mm x 950mm (approx)
- 5mm Hardox 450 wear plate one piece floor
- 5mm Hardox 450 internal kick plates
- 1 piece double skinned 3mm Domex 700 profiled fixed sides
- 3mm Domex profiled top rail, sides, front and tail
- 3mm Domex head board and front spill board
- Heavy duty rear & front posts 4mm Hardox to internal face
- 4mm Hardox top swung tail door with double pivot points
- RSC steel longitudinal body runners
- Domex 700 detachable pressed rear axle wings
- O/S N/S body access over rear axle
- Under floor twin stabilised tipping gear
- Edbro TS26 or Harsh J100
- Audible and visual height warning
- Whole vehicle type approved lateral and rear protection
- Rear protection to include type approved tow bar & 4 bolt hitch, factory fit 7 pin electrics
- Side & rear marker lights to current regulations
- Conspicuity markings cab & body to regulation ECE104
28T Tractor Unit 4x2
28T Tractor Unit 4x2
Specification
Dimensions
Key Features
Key Features
32T Commander Hook
32T Commander Hook
Specification
Dimensions
Key Features
Key Features
32T Curtain MofetKit
32T Curtain MofetKit
Specification
Dimensions
Key Features
Key Features
32T Dropside Truck Crane
32T Dropside Truck Crane
Specification
Dimensions
Key Features
Key Features
32T Hook Loader
32T Hook Loader
Specification
Dimensions
Key Features
Key Features
32T Tipper Truck
Specification
32T Tipper Truck
Specification
- Chassis Type: Mercedes-Benz, Arocs, 3240
- Body Type: Tipper
- GVW: 32 tonnes
- Est Payload +/- 5%: 16000kg
Dimensions
- Body Internal Length: 9096mm
- Body Internal Height: 2209.8mm
- Body Internal Height: 1016mm
- Overall Length: 9194.8mm
- Overall Width: 2540mm
- Overall Height: 2362.2mm
- Wheelbase: 5100mm
Key Features
- Electric sheeting system, cab operated
- Towing equipment with 7 pin electrics
- Tool box
- Manual tail gate opening
- Body access over rear axle
- Cab mounted beacon
- 5mm Hardox floor
- Hand wash unit
- Edbro tipping gear
- Manual whacker plate carrier
- WB 500mm 1st-3rd axle
- Tipping Gear
- In-cab controls
- Height warning in-cab
- Pump and all associated hydraulic pipe work
- 5mm Hardox 450 wear plate one piece floor
- 5mm Hardox 450 internal kick plates
- Heavy duty rear & front posts 4mm Hardox to internal face
- Side and rear marker lights to current regulations
- Conspicuity markings cab and body to regulation ECE104
- Cab Factory finish
- No Sub frame required
Key Features
- Electric sheeting system, cab operated
- Towing equipment with 7 pin electrics
- Tool box
- Manual tail gate opening
- Body access over rear axle
- Cab mounted beacon
- 5mm Hardox floor
- Hand wash unit
- Edbro tipping gear
- Manual whacker plate carrier
- WB 500mm 1st-3rd axle
- Tipping Gear
- In-cab controls
- Height warning in-cab
- Pump and all associated hydraulic pipe work
- 5mm Hardox 450 wear plate one piece floor
- 5mm Hardox 450 internal kick plates
- Heavy duty rear & front posts 4mm Hardox to internal face
- Side and rear marker lights to current regulations
- Conspicuity markings cab and body to regulation ECE104
- Cab Factory finish
- No Sub frame required
32T Tipper Grab
Specification
32T Tipper Grab
Specification
- Chassis Type: Mercedes-Benz, Arocs, 3240
- Body Type: Tipper Grab
- GVW: 32 tonnes
- Est Payload +/- 5%: 16000kg
Dimensions
- Body Internal Length: 5664.2mm
- Body Internal Height: 2057.4mm
- Body Internal Height: 1016mm
- Overall Length: 8915.4mm
- Overall Width: 2540mm
- Overall Height: 2463.8mm
- Wheelbase: 5100mm
Key Features
- Palfinger Epsilon M125
- Classic crane
- Dual crane controls
- 500ltr clamshell bucket
- Electric sheeting system, cab operated
- Towing equipment with 7 pin electrics
- Tool box
- Manual tail gate opening
- Body access over rear axle
- Chapter 8
- Cab mounted beacon
- 5mm hardox floor
- Hand wash unit
- Edbro tipping gear
- Manual whacker plate carrier
- Dummy load cells
- Front and rear strobes
- Conspicuity markings cab & body to regulation ECE104
Key Features
- Palfinger Epsilon M125
- Classic crane
- Dual crane controls
- 500ltr clamshell bucket
- Electric sheeting system, cab operated
- Towing equipment with 7 pin electrics
- Tool box
- Manual tail gate opening
- Body access over rear axle
- Chapter 8
- Cab mounted beacon
- 5mm hardox floor
- Hand wash unit
- Edbro tipping gear
- Manual whacker plate carrier
- Dummy load cells
- Front and rear strobes
- Conspicuity markings cab & body to regulation ECE104
32T 8x2 Refuse Truck
32T 8x2 Refuse Truck
Specification
Dimensions
Key Features
Key Features
38T Tractor Unit 4x2
38T Tractor Unit 4x2
Specification
Dimensions
Key Features
Key Features
44T Tractor Unit 6x2
44T Tractor Unit 6x2
Specification
Dimensions
Key Features
Key Features
7.5T Box Truck DD CH/FR
Specification
7.5T Box Truck DD CH/FR
Specification
- Chassis Type: Euro 6 Daf LF 160 4x2 Rigid
- Body Type: Box
- GVW: 7500kg
- Est Payload +/- 5%: Subject to Specification
Dimensions
- Internal Length: 4000-4800mm
- Internal Width: 2280mm
- Internal Height: 2200mm
- Overall Length: TBC
- Overall Width: 2400mm
- Overall Height: TBC
- Wheelbase: 3900mm
Key Features
- Refrigerated Box built to ATP Class C standard
- Triple Rear Doors
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 900mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain Hole
- Thermal Curtains
- 6/8 Pallet Body Capacity
Key Features
- Refrigerated Box built to ATP Class C standard
- Triple Rear Doors
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 900mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain Hole
- Thermal Curtains
- 6/8 Pallet Body Capacity
7.5T Box Truck DD CH/FR+TL
7.5T Box Truck DD CH/FR+TL
Specification
Dimensions
Key Features
Key Features
12T Box Truck DD Dual+TL
Specification
12T Box Truck DD Dual+TL
Specification
- Chassis Type: Euro 6 Daf LF45 4x2 Rigid
- Body Type: Dual Compartment with Tuckaway Tail Lift
- GVW: 12000kg
- Est Payload +/- 5%: Subject to specification
Dimensions
- Internal Length: 6000-6200mm
- Internal Width: 2280mm
- Internal Height: 2200mm
Key Features
- Refrigerated Box built to ATP Class C Standard
- Rear Barn Doors
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 900mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain Hole
- Thermal Curtains
- Tuckaway Folding Tail Lift
- 10 Pallet Body Capacity
Key Features
- Refrigerated Box built to ATP Class C Standard
- Rear Barn Doors
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 900mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain Hole
- Thermal Curtains
- Tuckaway Folding Tail Lift
- 10 Pallet Body Capacity
14T Box Truck Fridge
14T Box Truck Fridge
Specification
Dimensions
Key Features
Key Features
15T Box Truck DIE Dual+TL
Specification
15T Box Truck DIE Dual+TL
Specification
- Chassis Type: Euro 6 Daf LF55 220/210 4x2 Rigid
- Body Type: Dual Compartment with Retractable Sliding Lift
- GVW: 15000kg
- Est Payload +/- 5%: Subject to Specification
Dimensions
- Body Internal Length: 7000-7400mm
- Body Internal Width: 2480mm
- Body Internal Height: 2500mm
- Overall Length: TBC
- Overall Width: 2600mm
- Overall Height: TBC
- Wheelbase: TBC
Key Features
- Refrigerated Box built to ATP Class C Standard
- Rear Roller Shutters
- Near Side Pallet Width Side Door with Side Step
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 900mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain hole
- Retractable Tail Lift, with hinged side, rear
- Loading ramps and Safety P Gates
- 12/14 Pallet Body Capacity
Key Features
- Refrigerated Box built to ATP Class C Standard
- Rear Roller Shutters
- Near Side Pallet Width Side Door with Side Step
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 900mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain hole
- Retractable Tail Lift, with hinged side, rear
- Loading ramps and Safety P Gates
- 12/14 Pallet Body Capacity
18T Box Truck DIE Dual+TL
Specification
18T Box Truck DIE Dual+TL
Specification
- Chassis Type: Euro 6 Daf LF55 220 4x2 Rigid
- Body Type: Dual Compartment with Retractable Tail Lift
- GVW: 18000kg
- Est Payload +/- 5%: Subject to Specification
Dimensions
- Body Internal Length: 8000-8400mm
- Body Internal Width: 2480mm
- Body Internal Height: 2500mm
- Overall Length: TBC
- Overall Width: 2600mm
- Overall Height: TBC
- Wheelbase: TBC
Key Features
- Refrigerated Box built to ATP Class C Standard
- Double Rear Doors
- Near Side Pallet Width Side Door with Side Step
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 800mm & 1200mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain hole
- Retractable Tail Lift, with hinged side, rear
- Loading ramps and Safety P Gates
- 14/16 Pallet Body Capacity
Key Features
- Refrigerated Box built to ATP Class C Standard
- Double Rear Doors
- Near Side Pallet Width Side Door with Side Step
- Alloy Cab Cat Walk
- 2 x rows of 1806 Internal Load Lock Set at 800mm & 1200mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain hole
- Retractable Tail Lift, with hinged side, rear
- Loading ramps and Safety P Gates
- 14/16 Pallet Body Capacity
18T Frigo/TRS
18T Frigo/TRS
Specification
Dimensions
Key Features
Key Features
26T Box Truck DIE Dual+TL
Specification
26T Box Truck DIE Dual+TL
Specification
- Chassis Type: Euro 6 DAF CF75 350 6x2 Rigid
- Body Type: Dual Compartment with Retractable Tail Lift
- GVW: 26000kg
- Est Payload +/- 5%: Subject to Specification
Dimensions
- Body Internal Length: 8900-9200mm
- Body Internal Width: 2600mm
- Body Internal Height: 2500mm
Key Features
- Refrigerated Box built to ATP Class C standard
- Double Rear Doors
- Near Side Pallet Width Side Door with Side Step
- Alloy Cab Cat Walk
- 2 x rows of 1806 internal load lock set at 800mm & 1200mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain hole
- Dhollandia 1500kg Retractable Tail Lift with 1300mm steel platform, hinged side, rear
- Loading ramps & Safety P Gates
- 16/18 pallet body capacity
Key Features
- Refrigerated Box built to ATP Class C standard
- Double Rear Doors
- Near Side Pallet Width Side Door with Side Step
- Alloy Cab Cat Walk
- 2 x rows of 1806 internal load lock set at 800mm & 1200mm from floor
- Interior Light Switch and Recessed Light Fitting
- 2 x Temperature Probe
- Gritted Anti Slip Floor & Drain hole
- Dhollandia 1500kg Retractable Tail Lift with 1300mm steel platform, hinged side, rear
- Loading ramps & Safety P Gates
- 16/18 pallet body capacity
26T Truck Chick Carrier TL
26T Truck Chick Carrier TL
Specification
Dimensions
Key Features
Key Features
14 Seat Minibus BEV
14 Seat Minibus BEV
Specification
Dimensions
Key Features
Key Features
15 Seat Minibus
15 Seat Minibus
Specification
Dimensions
Key Features
Key Features
16 Seat Minibus
16 Seat Minibus
Specification
Dimensions
Key Features
Key Features
17 Seat Minibus
17 Seat Minibus
Specification
Dimensions
Key Features
Key Features
2.9T Van
2.9T Van
Specification
Dimensions
Key Features
Key Features
2.9T Van BEV
2.9T Van BEV
Specification
Dimensions
Key Features
Key Features
2.9T Van Multi-Seat
2.9T Van Multi-Seat
Specification
Dimensions
Key Features
Key Features
2.9T Van Multseat BEV
2.9T Van Multseat BEV
Specification
Dimensions
Key Features
Key Features
Customised Curtainside Truck
Customised Curtainside Truck
Specification
Dimensions
Key Features
Key Features
2.9T Van PHEV
2.9T Van PHEV
Specification
Dimensions
Key Features
Key Features
3.5T Base DropCrew TL
3.5T Base DropCrew TL
Specification
Dimensions
Key Features
Key Features
3.5T Base Dropside Van
3.5T Base Dropside Van
Specification
Dimensions
Key Features
Key Features
3.5T Drop/Tip MLC Van
3.5T Drop/Tip MLC Van
Specification
Dimensions
Key Features
Key Features
3.5T Dropside TM Van
3.5T Dropside TM Van
Specification
Dimensions
Key Features
Key Features
3.5T Dropside TM LP13 Van
3.5T Dropside TM LP13 Van
Specification
Dimensions
Key Features
Key Features
3.5T Dropside Tail Lift Crane Van
3.5T Dropside Tail Lift Crane Van
Specification
Dimensions
Key Features
Key Features
3.5T Mid Dropside Van
3.5T Mid Dropside Van
Specification
Dimensions
Key Features
Key Features
3.5T Mid Dropside TL
3.5T Mid Dropside TL
Specification
Dimensions
Key Features
Key Features
3.5T TM DS LF LP13
3.5T TM DS LF LP13
Specification
Dimensions
Key Features
Key Features
3.5T TM DS Low Floor
3.5T TM DS Low Floor
Specification
Dimensions
Key Features
Key Features
3.5T Curtain
3.5T Curtain
Specification
Dimensions
Key Features
Key Features
3.5T Curtain TL
3.5T Curtain TL
Specification
Dimensions
Key Features
Key Features
3.5T Dropside BEV
3.5T Dropside BEV
Specification
Dimensions
Key Features
Key Features
3.5T 6 Seat Crew Van
3.5T 6 Seat Crew Van
Specification
Dimensions
Key Features
Key Features
3.5T Bowser
3.5T Bowser
Specification
Dimensions
Key Features
Key Features
3.5T Cage Tipper Van
3.5T Cage Tipper Van
Specification
Dimensions
Key Features
Key Features
3.5T Cage Tipper C/C Van
3.5T Cage Tipper C/C Van
Specification
Dimensions
Key Features
Key Features
3.5T Luton Van
3.5T Luton Van
Specification
Dimensions
Key Features
Key Features
3.5T Luton LowLoader Van
3.5T Luton LowLoader Van
Specification
Dimensions
Key Features
Key Features
3.5T Luton Van Tail Lift
3.5T Luton Van Tail Lift
Specification
Dimensions
Key Features
Key Features
3.5T LWB 4x4 Van
3.5T LWB 4x4 Van
Specification
Dimensions
Key Features
Key Features
3.5T LWB Utility 1Pas Van
3.5T LWB Utility 1Pas Van
Specification
Dimensions
Key Features
Key Features
3.5T LWB Van
3.5T LWB Van
Specification
Dimensions
Key Features
Key Features
3.5T LWB Van BEV
3.5T LWB Van BEV
Specification
Dimensions
Key Features
Key Features
3.5T LWB Van 1Pas Seat
3.5T LWB Van 1Pas Seat
Specification
Dimensions
Key Features
Key Features
3.5T LWB Mob-Fitter Van
3.5T LWB Mob-Fitter Van
Specification
Dimensions
Key Features
Key Features
3.5T Tipper Van
3.5T Tipper Van
Specification
Dimensions
Key Features
Key Features
3.5T Tipper BEV Van
3.5T Tipper BEV Van
Specification
Dimensions
Key Features
Key Features
3.5T Tipper Crew Cab Van
3.5T Tipper Crew Cab Van
Specification
Dimensions
Key Features
Key Features
3.5T Tipper Pen Crane Van
3.5T Tipper Pen Crane Van
Specification
Dimensions
Key Features
Key Features
3.5T Tip Crew Cab No Seat Van
3.5T Tip Crew Cab No Seat Van
Specification
Dimensions
Key Features
Key Features
3.5T TM Tipper Van
3.5T TM Tipper Van
Specification
Dimensions
Key Features
Key Features
3.5T Utility 7T GTW Van
3.5T Utility 7T GTW Van
Specification
Dimensions
Key Features
Key Features
3.5T Utility Spec Van
3.5T Utility Spec Van
Specification
Dimensions
Key Features
Key Features
3.5T Van 7T GTW Van
3.5T Van 7T GTW Van
Specification
Dimensions
Key Features
Key Features
4.5T Box Van
4.5T Box Van
Specification
Dimensions
Key Features
Key Features
9 Seat Crew Van
9 Seat Crew Van
Specification
Dimensions
Key Features
Key Features
9 Seat MPV
9 Seat MPV
Specification
Dimensions
Key Features
Key Features
Car Derived Van
Specification
Car Derived Van
Specification
- Chassis Type: Citroen Berlingo / Peugeot Partner
- Body Type: Van
- GVW: 1945kg
- Est Payload +/- 5%: 500kg
Dimensions
- Internal Length: 1360mm
- Internal Width:1070mm
- Internal Height: 1000mm
- Overall Length: 4350mm
- Overall Width: 2160mm
- Overall Height: 2100mm
- Wheelbase: 2800mm
Key Features
- 50mm Insulated Line out
- Insulated Rear Doors with pallet access
- Interior Light
- 1 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- 1 Pallet Body Capacity
Key Features
- 50mm Insulated Line out
- Insulated Rear Doors with pallet access
- Interior Light
- 1 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- 1 Pallet Body Capacity
Car Derived Van BEV
Car Derived Van BEV
Specification
Dimensions
Key Features
Key Features
Car Derived Van Utility Spec
Car Derived Van Utility Spec
Specification
Dimensions
Key Features
Key Features
Fiesta Van
Fiesta Van
Specification
Dimensions
Key Features
Key Features
Luton Low Loader Van Tail Lift
Luton Low Loader Van Tail Lift
Specification
Dimensions
Key Features
Key Features
Welfare Van
Welfare Van
Specification
Dimensions
Key Features
Key Features
Welfare Van with WC
Welfare Van with WC
Specification
Dimensions
Key Features
Key Features
Small Van
Small Van
Specification
Dimensions
Key Features
Key Features
Utility Spec Van V2 L1
Utility Spec Van V2 L1
Specification
Dimensions
Key Features
Key Features
Utility Spec Van V2 L2
Utility Spec Van V2 L2
Specification
Dimensions
Key Features
Key Features
V1 Auto L1 Van
V1 Auto L1 Van
Specification
Dimensions
Key Features
Key Features
V1 Auto L2 Van
V1 Auto L2 Van
Specification
Dimensions
Key Features
Key Features
V1 L1 Premium Van
V1 L1 Premium Van
Specification
Dimensions
Key Features
Key Features
V1 L2 Premium
V1 L2 Premium
Specification
Dimensions
Key Features
Key Features
V1 5 Seat Crew Van
V1 5 Seat Crew Van
Specification
Dimensions
Key Features
Key Features
V1 5 Seat Crew Van Premium
V1 5 Seat Crew Van Premium
Specification
Dimensions
Key Features
Key Features
V1 Maxi Van Premium
V1 Maxi Van Premium
Specification
Dimensions
Key Features
Key Features
V4 Premium Van
V4 Premium Van
Specification
Dimensions
Key Features
Key Features
Utility Spec Van V2 L1
Utility Spec Van V2 L1
Specification
Dimensions
Key Features
Key Features
3T SWB Heavy Chill Refrigerated Van
3T SWB Heavy Chill Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3T SWB Twin Pharma Refrigerated Van
3T SWB Twin Pharma Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3.5T Box Chill/Freeze Refrigerated Van
Specification
3.5T Box Chill/Freeze Refrigerated Van
Specification
- Chassis Type: Mercedes Sprinter
- Body Type: Van
- GVW: 3500kg
- Est Payload +/- 5%: 800kg
Dimensions
- Internal Length: 3000mm
- Internal Width: 1890mm
- Internal Height: 1950mm
- Overall Length: TBC
- Overall Width: 2450mm
- Overall Height: 3030mm
- Wheelbase: 3500mm
Key Features
- Refrigerated Box built to ATP Class C standard
- 2 x Interior Light
- 2 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- Rear Folding Step
- 3 Pallet Body Capacity
Key Features
- Refrigerated Box built to ATP Class C standard
- 2 x Interior Light
- 2 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- Rear Folding Step
- 3 Pallet Body Capacity
3.5T Box Chill/Freeze Refrigerated Van with Tail Lift
3.5T Box Chill/Freeze Refrigerated Van with Tail Lift
Specification
Dimensions
Key Features
Key Features
3.5T LWB Chill/Freeze Refrigerated Van
3.5T LWB Chill/Freeze Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3.5T LWB Heavy Chill Refrigerated Van
3.5T LWB Heavy Chill Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3.5T LWB Twin Fixed Refrigerated Van
3.5T LWB Twin Fixed Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3.5T MWB Chill/Freeze Refrigerated Van
Specification
3.5T MWB Chill/Freeze Refrigerated Van
Specification
- Chassis Type: Mercedes Sprinter
- Body Type: Van
- GVW: 3500kg
- Est Payload +/- 5%: 875kg
Dimensions
- Internal Length: 3100mm
- Internal Width: 1220mm
- Internal Height: 1760mm
- Overall Length: 5900mm
- Overall Width: 2450mm
- Overall Height: 2650mm
- Wheelbase: 3500mm
Key Features
- 80mm Insulated Line out
- Insulated Rear Doors with pallet access
- Interior Light
- 2 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- Roof Mounted Condenser Pod
- 3 Pallet Body Capacity
Key Features
- 80mm Insulated Line out
- Insulated Rear Doors with pallet access
- Interior Light
- 2 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- Roof Mounted Condenser Pod
- 3 Pallet Body Capacity
3.5T MWB Heavy Chill Refrigerated Van
3.5T MWB Heavy Chill Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3.5T MWB Twin Fixed Refrigerated Van
3.5T MWB Twin Fixed Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3.5T MWB Dual Moveable Refrigerated Van
3.5T MWB Dual Moveable Refrigerated Van
Specification
Dimensions
Key Features
Key Features
3T CDV Heavy Chill Refrigerated Van
Specification
3T CDV Heavy Chill Refrigerated Van
Specification
- Chassis Type: Ford Transit 280 / Vauxhall Vivaro 2.0L
- Body Type: Van
- GVW: 2800kg
- Est Payload +/- 5%: 750kg
Dimensions
- Internal Length: 2280mm
- Internal Width: 1230mm
- Internal Height: 1230mm
- Overall Length: 4700mm
- Overall Width: 2450mm
- Overall Height: 2300mm
- Wheelbase: 3000mm
Key Features
- 50mm Insulated Line out
- Insulated Rear Doors with pallet access
- Interior Light
- 1 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- 1 Pallet Body Capacity
Key Features
- 50mm Insulated Line out
- Insulated Rear Doors with pallet access
- Interior Light
- 1 x Temperature Probe
- Interior Load Protection
- Gritted Anti Slip Floor
- Drain Hole
- 1 Pallet Body Capacity
4x4 MEWP Access 13M Pickup
4x4 MEWP Access 13M Pickup
Specification
Dimensions
Key Features
Key Features
Commercial 4X4 Large Pickup
Commercial 4X4 Large Pickup
Specification
Dimensions
Key Features
Key Features
Commercial 4X4 Small Pickup
Commercial 4X4 Small Pickup
Specification
Dimensions
Key Features
Key Features
DC 4X4PU BASE NO TOP Pickup
DC 4X4PU BASE NO TOP Pickup
Specification
Dimensions
Key Features
Key Features
DC 4X4PU BASE TOP Pickup
DC 4X4PU BASE TOP Pickup
Specification
Dimensions
Key Features
Key Features
DC 4X4PU HGH SPC NO TOP Pickup
DC 4X4PU HGH SPC NO TOP Pickup
Specification
Dimensions
Key Features
Key Features
DC 4X4PU HIGH SPC TOP Pickup
DC 4X4PU HIGH SPC TOP Pickup
Specification
Dimensions
Key Features
Key Features
DC 4X4PU MED SPC NO TOP Pickup
DC 4X4PU MED SPC NO TOP Pickup
Specification
Dimensions
Key Features
Key Features
DC 4X4PU MED SPC TOP Pickup
DC 4X4PU MED SPC TOP Pickup
Specification
Dimensions
Key Features
Key Features
EXT 4X4PU BASE NO TOP Pickup
EXT 4X4PU BASE NO TOP Pickup
Specification
Dimensions
Key Features
Key Features
EXT 4X4PU BASE TOP Pickup
EXT 4X4PU BASE TOP Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 110 Utility S/W Pickup
L/Rover 110 Utility S/W Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 110 D/Cab P Pickup
L/Rover 110 D/Cab P Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 110 H/Top Pickup
L/Rover 110 H/Top Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 110 HCPU Pickup
L/Rover 110 HCPU Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 110 Pickup
L/Rover 110 Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 110 S/Wagon Pickup
L/Rover 110 S/Wagon Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 130 D/Cab Pickup
L/Rover 130 D/Cab Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 130 Tipper Pickup
L/Rover 130 Tipper Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 90 H/Top Pickup
L/Rover 90 H/Top Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 90 Pickup
L/Rover 90 Pickup
Specification
Dimensions
Key Features
Key Features
L/Rover 90 S/Wagon Pickup
L/Rover 90 S/Wagon Pickup
Specification
Dimensions
Key Features
Key Features
SC 4X4PU BASE NO TOP Pickup
SC 4X4PU BASE NO TOP Pickup
Specification
Dimensions
Key Features
Key Features
SC 4X4PU BASE TOP Pickup
SC 4X4PU BASE TOP Pickup
Specification
Dimensions
Key Features
Key Features
No results found
Why should you hire a tipper van for your fleet?
Scale with ease
Does your workload fluctuate? Our flexible plans let you adjust your fleet size up or down as needed, ensuring you always have the right capacity for the job.
Free up capital
Skip the hefty upfront cost and invest your resources elsewhere. Flexible hire keeps more cash flowing in your business.
Stay agile
Markets and needs can change in a flash. With Flex-E-Rent, you have the freedom to adapt to market needs on the go, responding to changes in demand, giving you flexibility.
Why should you choose Flex-E-Rent for flexible tipper van hire?
Part of the Enterprise Group - the UK and Ireland's Largest Commercial Vehicle Hire Company
- Flex your fleet: Easily adjust your tipper van fleet size and composition as your business needs evolve. Never be over-extended or under-prepared again.
- Competitive rates: We offer exceptional value without compromising on quality or service. Get the most out of your budget.
- Nationwide coverage: Access a vast network of tipper vans – with 27 depots across the UK and six in the Republic of Ireland, we've got you covered.
- Peace of mind: Our comprehensive fleet maintenance and service programs keep your vans running smoothly and on the job.
- Customise your look & functionality: Brand your tipper vans with your company logo and livery for a professional look. We also offer customisation options to ensure your tipper vans meet the demands of the job.
"Enterprise’s flexibility helped us to continue trading in a very difficult period and keep cash in the business. We’re now growing the fleet again and are sticking with flexible rental, because we know first-hand that it’s a solution that doesn’t force us to invest in expensive assets."
John Henry Group
Tipper vehicle hire options
No matter what your acquisition requirements are, we can provide you with the vehicles you need, with the freedom to hire in a way that suits you. Easily hire the tipper van or truck of your choice with short, long term or flexible hire.
Long term hire
Regardless of the size of your commercial fleet, our fixed term hire options can be tailored to meet the exacting needs of your business.
Long term hire
- Custom built vehicles to meet your specification
- Up to 7 year hire
- The UK's widest range of vehicles for hire
Flexible hire
Get the vehicles you want with the modifications you need. Return or exchange vehicles without any penalties, and enjoy our expert support every step of the way.
Flexible hire
- Get the benefits of fixed term and short term hire in one package
- Scale your fleet up or down to meet changing levels of demand
- Reduce the risk of long-term fixed hire
- Vehicles can be modified to your specifications, with ancillary equipment and company livery available
Short term hire
Whether you need a vehicle for a day or a month, you can still benefit from industry-leading service and expert advice with our short term hire.
Short term hire
- Tailor your fleet
- Get more vehicles to cover busy periods
- Hire specialised vehicles
Hire your vehicles today for your business
Hire your tipper van fleet vehicle for either the long haul or short term. We also provide immediate hire for emergency cover, provided that you already have an existing account.
You’ll need your fleet insurance and an account to rent a vehicle from us. If you have both you can make a hire enquiry here and tell us what sort of vehicle you are looking for.
Don’t have fleet insurance?
Hire standard and light weight commercial vehicles (LCVs) through our sister Brand, Enterprise Rent-A-Car.
%20(1).png?width=215&height=190&name=vauxhall-Movano-mess-welfare-van%208%20(1)%20(1).png)
Fill in this form for:
- Long term rental
- Short term hire (not immediate) You must already have fleet insurance.
- Immediate short term hire where you already have an account with us.
.png?width=179&height=200&name=mtf-flex-tipper%209%20(2).png)
New to Flex-E-Rent?
Create an account with us to easily rent vehicles precisely when you need them the most.
.png?width=180&height=198&name=image%2055%20(1).png)